https://doi.org/10.1140/epjp/s13360-024-05638-6
Regular Article
Thermoluminescence and kinetic parameters of irradiated dopant calcium aluminate nanophosphors
1
Department of Physics, Faculty of Science, Ain Shams University, 11566, Abbassia, Cairo, Egypt
2
Department of Basic Science, Faculty of Engineering, Heliopolis University, 11785, Cairo, Egypt
a
nabil_elfaramawi1@sci.asu.edu.eg
Received:
5
June
2024
Accepted:
10
September
2024
Published online:
8
October
2024
CaAl2O4:0.1% La nanoparticles doped with different concentrations of Mg were prepared using the sol–gel method and annealed at 400 °C, 500 °C, and 800 °C, respectively. The prepared nanophosphors show a highly crystalline orthorhombic structure with a crystallite size of about 81.2 nm. The optimum concentration of Mg dopants is about 0.7 mol%. The thermoluminescence (TL) glow curve of 11 Gy of beta-ray irradiated CaAl2O4:0.1% La:0.7% Mg measured at heating rates of 5 K/s has 16 overlapping glow peaks. The TL kinetic parameters for the prepared nanoparticles were evaluated using two different methods and they exhibited good agreement. Moreover, the linearity dose response of dosimetric peaks follows a good linearity up to 220 Gy in nanophosphor. The minimum detectable dose of the prepared nanophosphor was 125.7 mGy. The results of the prepared nanophosphors suggest good candidates for dosimetric applications.
© The Author(s) 2024
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
