https://doi.org/10.1140/epjp/s13360-025-06149-8
Regular Article
Rad-hard silicon carbide thermal neutron detectors for quality assurance in BNCT
1
INFN-LNF, via E. Fermi 40, 00044, Frascati, Italy
2
ICTP International Centre for Theoretical Physics, Strada Costiera, 11, 34151, Trieste, Italy
3
ENEA C.R. Frascati, via E. Fermi N. 45, 00044, Frascati (Rome), Italy
a
antonino.pietropaolo@enea.it
Received:
14
November
2024
Accepted:
17
February
2025
Published online:
21
March
2025
Quality Assurance in BNCT dosimetry includes the determination of spatial distributions of thermal neutrons in a water phantom. Activation foils are typically adopted as thermal neutron detectors, making measurements time consuming and requiring considerable manpower. This process would be greatly simplified if an active thermal neutron sensor existed which could scan the volume of a water phantom, as done in conventional radiotherapy with electron LINACs. To this aim, an experiment was organised using rad-hard Silicon Carbide Schottky diodes with active area 1 mm2, sensitized to thermal neutrons with a 30 μm 6LiF coating. To operate in water, they were made waterproof through a customised 3D printed plastic holder. A suitable neutron field was produced by degrading the 14 MeV beam from the ENEA Frascati Neutron Generator with an assembly formed by a copper-lead shielding followed by a water phantom. The thermal neutron fluence achieved in the water phantom was in the order of 2–3 × 105 cm−2 s−1. The spatial distribution of thermal neutrons in water was measured using both the Silicon Carbide Schottky diodes and the gold activation foils. The experiment was fully simulated with MCNP. This paper presents the results of the experiment and the possible implications for Quality Assurance in BNCT dosimetry.
© The Author(s) 2025
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
