https://doi.org/10.1140/epjp/s13360-025-06055-z
Regular Article
An approach for fast and qualitative detection of thin coatings on non-woven fabric via laser-induced breakdown spectroscopy
1
Faculty of Engineering and Health, University of Applied Sciences and Arts, Von-Ossietzky-Straße 99, 37085, Göttingen, Germany
2
Faculty of Natural and Materials Science, Clausthal University of Technology, Robert-Koch-Straße 42, 38678, Clausthal-Zellerfeld, Germany
3
Department of Plasma Physics and Technology, CEPLANT – R&D Centre for Plasma and Nanotechnology Surface Modifications, Faculty of Science, Masaryk University, Kotlářská 2, 611 37, Brno, Czech Republic
4
School of Industrial and Information Engineering, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133, Milan, Italy
Received:
23
November
2024
Accepted:
23
January
2025
Published online:
17
February
2025
In modern textile industry, the application of thinnest functional coatings on fabrics has become state-of-the-art for realising daily used goods with defined surface properties. However, since woven fabrics or non-woven textiles feature complex and undefined surfaces, classical measurement of the thickness and thickness homogeneity via classical geometrical methods is a challenging task. Against this background, an alternative approach based on spectroscopic data was investigated in this work. For this purpose, polyester non-woven textiles and plane control samples were coated with silicon suboxide-like layers using a plasma coating process. The coating thickness was then detected indirectly by measuring the ratio of characteristic elemental lines from the coating and substrate material via laser-induced breakdown spectroscopy. It is shown that with increasing number of laser pulses and decreasing residual thickness, respectively, this ratio decreases logarithmically. Such a decrease has turned out to be independent of the substrate surface texture. However, some restrictions of the investigated approach were identified by additional microscopic measurements where an inhomogeneous layer growth as well as laser-induced delamination was ascertained. The impact of these effects on the detected ratio is thus discussed. The results finally represent a proof of principle as a basis for ongoing work for spectroscopic measurement of coating thickness on complexly shaped surfaces.
© The Author(s) 2025
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
