https://doi.org/10.1140/epjp/s13360-024-05130-1
Regular Article
Characterisation of the neutron sources in use at STUK SSDL through a new transfer instrument with spectrometric capabilities
1
Istituto Nazionale di Fisica Nucleare-Frascati National Laboratories, Frascati, Italy
2
INFN Sezione di Torino, via Pietro Giuria 1, 10125, Turin, Italy
3
Università degli Studi di Torino, Via P. Giuria 1, 10125, Turin, Italy
4
Department of Fusion and Technologies for Nuclear Safety and Security, ENEA, Frascati, Italy
5
CIEMAT, Av. Complutense 40, 28040, Madrid, Spain
6
STUK-Radiation and Nuclear Safety Authority, Jokiniemenkuja 1, 01370, Vantaa, Finland
k
antonino.pietropaolo@enea.it
Received:
11
November
2023
Accepted:
23
March
2024
Published online:
5
May
2024
Characterising neutron sources for calibration or generic testing purposes is a complex task, as the neutron spectrum may depend, to some extent, on the construction characteristics of the source. Bonner spheres (BS) are the traditional spectrometric transfer instruments, but they are very sensitive to room scatter and required measurements are highly time consuming. The recently developed NCT-WES device, belonging to the family of the Single Moderator Neutron Spectrometers, has been proposed as a convenient alternative to BS. This work presents the results of a demonstration campaign organised at the STUK neutron metrology laboratory (Finland) in July 2023, where the spectra from two 252Cf and two 241Am-Be sources were determined. For the 241Am-Be sources, the results were compared to the spectra of two categories recently introduced by ISO 8529-1. Based on the results it was concluded that the “large” source category is an appropriate selection for STUK sources. The campaign also proved the operational advantages of NCT-WES as spectrometric transfer instrument.
© The Author(s) 2024
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
