https://doi.org/10.1140/epjp/s13360-023-04262-0
Regular Article
Synergistic effect achieved in ionizing radiation shielding with epoxy-based composites blended with nature-inspired micro- and nanoparticle mixtures
1
Graduate School of Science and Engineering, Yildiz Technical University, 34220, Istanbul, Turkey
2
Arçelik R&D and Design Centers, 34528, Istanbul, Turkey
3
Department of Physics, Yildiz Technical University, 34220, Istanbul, Turkey
e mekilic@yildiz.edu.tr, kilic-m@hotmail.com
Received:
22
March
2023
Accepted:
7
July
2023
Published online:
19
July
2023
This study discusses the synergy created by mixing two different materials, which is the primary motivation for producing composites, from a different perspective. In this context, it is aimed to investigate how much a desired feature of a matrix can be improved by adding reinforcing particles to a main matrix. Following this purpose, epoxy matrix and silver particles have been chosen as the components of the composites, and the ability to protect from ionizing radiation was considered as the physical property to be developed. To obtain the highest ionizing radiation shielding ability, three different composite families have been tested: composites containing only micro-sized Ag particles (2%, 4%, 8%, 16%, and 32% by mass), containing only nano-sized Ag particles (2%, 4%, 8%, and 16% by mass), and those containing half the mass of micro- and nano-sized Ag particles (1% nano + 1% micro, 2% nano + 2% micro, 4% nano + 4% micro, 8% nano + 8% micro, and 16% nano + 16% micro by mass). The main motivation for the preparation of a composite family containing micro/nano-reinforcing particle mixtures was to examine whether there could be a synergistic effect of combining the large volume advantage of microparticles and the large surface area advantage of nanoparticles in one structure. The radiation shielding performances of the samples have been experimentally investigated in the context of linear attenuation coefficient (µ), half value layer (HVL), and mean free path (λ) parameters for photons with energies ranging from 81 to 356 keV. Finally, the particle size effect (PSE) has been discussed. PSE discussion has figured out that the greatest PSE values greater than 1 have been obtained for micro/nano-Ag particle mixtures. All available experimental data have shown that the highest µ values (1.520 cm−1 for 81 keV and 0.171 cm−1 for 356 keV) and therefore the shortest HVL (0.454 cm for 81 keV and 4.039 cm−1 for 356 keV) and λ (0.655 cm for 81 keV and 5.289 cm−1 for 356 keV) values are obtained for the epoxy-based composite having 16% micro-Ag/16% nano-Ag particle mixtures in both photon energies studied.
Copyright comment Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
© The Author(s), under exclusive licence to Società Italiana di Fisica and Springer-Verlag GmbH Germany, part of Springer Nature 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
