Eur. Phys. J. Plus (2022) 137: 62
https://doi.org/10.1140/epjp/s13360-021-02297-9

Regular Article

Effect of transition metals (Zr and Hf) on microstructure, thermodynamic parameters, electrical resistivity, and magnetization of CuAlMn-based shape memory alloy

¹ Department of Physics, Faculty of Science, Firat University, Elazig, Turkey
² Department of Physics, College of Science, University of Raparin, Sulaymaneyah, Iraq

^d inqader@gmail.com

Received: 12 June 2021
Accepted: 17 December 2021
Published online: 27 December 2021

Abstract

In the present study, the effect of adding different compositions of Zirconium and Hafnium on thermal, electrical, and magnetization behaviors of a Cu-Al-Mn-based shape memory alloy has been investigated. The samples were produced by the arc melting method in a controlled environment. According to DSC results, the austenite phase transformation temperatures were decreased by adding Zr and Hf, while the martensite phase transformation temperatures were increased, consequently, the temperature hysteresis was narrowed. Likewise, the same results were obtained in the electrical resistivity measurement. On the other hand, the enthalpy change in both heating and cooling cycles was increased. The XRD analysis presented that all specimens have approximately the same pattern with martensite phase formed in two different morphologies (${\beta }_1^{{}^{\prime }}$${\mathrm{and}\gamma }_1^{{}^{\prime }}$), and the same result was investigated in SEM analysis. Also, the crystallite size was reduced by the effect of Zr and Hf. The magnetization behavior of the alloys revealed that the ternary Cu₇₀Al₂₄Mn₆ (atomic percent) alloy has a superparamagnetic behavior at room temperature, but when Hf and/or Zr were added, the alloy changed to a paramagnetic shape memory alloy, indicating that Hf and Zr could fully shift the L2₁ phase to the DO₃ phase, which can effect on the magnetic behavior of the alloys.