https://doi.org/10.1140/epjp/s13360-025-07021-5
Regular Article
Shielding characteristics of poly (vinyl chloride) polymer film reinforced with Bi2O3/Dy2O3 nanoparticles
1
Nuclear and Radiological Safety Research Center (NRSRC). Egyptian Atomic Energy Authority (EAEA), Cairo, Egypt
2
Polymer Chemistry Department, National Center for Radiation Research and Technology (NCRRT), Egyptian Atomic Energy Authority (EAEA), Cairo, Egypt
Received:
27
May
2025
Accepted:
31
October
2025
Published online:
28
November
2025
Poly (vinyl chloride) (PVC) is one of the most widely used synthetic polymers due to its flexibility, low density, and ability to be reinforced with fillers to enhance its physical properties. In this study, PVC polymer films were reinforced with varying concentrations of Bi2O3 and Bi2O3 + Dy2O3 nanoparticles to investigate their mechanical and radiation shielding properties. The nanocomposite polymer films were fabricated using the hot compression molding technique. Structural and chemical analyses were performed using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) to confirm the uniform dispersion and chemical interaction of the nanoparticles within the PVC matrix. The influence of nanoparticle concentration and gamma irradiation dose on the mechanical properties of the polymer films was evaluated through tensile strength and elongation tests. Results revealed that increasing the nanoparticle content slightly improved the tensile strength, while gamma exposure enhanced mechanical performance with minimal effect on elongation. The radiation shielding capability of the prepared PVC/Bi2O3 and PVC/Bi2O3 + Dy2O3 polymer films was assessed experimentally using a Cs-137 gamma source (5 μCi) and a 241Am–Be neutron source (185 GBq). The linear attenuation coefficients and neutron attenuation parameters were measured as a function of nanoparticle weight fraction. Monte Carlo simulations (MCNPX) and Phy-X software were used to validate the experimental data. The results showed excellent agreement between experimental and simulated values, confirming that the polymer film containing 15 wt% Bi2O3 exhibited superior radiation shielding performance. These findings suggest that PVC polymer films reinforced with Bi2O3/Dy2O3 nanoparticles are promising candidates for flexible and lightweight radiation protection materials suitable for medical and industrial applications.
© The Author(s) 2025
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
