https://doi.org/10.1140/epjp/s13360-025-06758-3
Regular Article
Investigation of solar cell cover glass surfaces after long-term exposure to desert climate in Southern Algeria
1
Faculty of Engineering and Health, University of Applied Sciences and Arts, Von-Ossiezky-Straße 99, 37085, Göttingen, Germany
2
Dipartimento di Fisica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133, Milan, Italy
3
Laboratoire de Physique des Plasmas, Matériaux Conducteurs et leurs Applications LPPMCA, Université des Sciences et de la Technologie d’Oran Mohamed Boudiaf USTO-MB, BP 1505 El M’naouer, 31000, Oran, Algeria
4
Application Center for Plasma and Photonics, Fraunhofer Institute for Surface Engineering and Thin Films IST, Von-Ossietzky-Straße 100, 37085, Göttingen, Germany
5
Centre de Recherche en Technologie des Semi-Conducteurs Pour l’Energétique, 02 Bd. Dr. Frantz Fanon, B.P. 140 Alger-7 Merveilles, 16038, Alger, Algeria
6
LP3, Aix-Marseille Université, CNRS, 163 Avenue de Luminy, 13288, Marseille, France
7
CETIM, 52 Avenue Félix Louat, 60300, Senlis, France
Received:
10
June
2025
Accepted:
18
August
2025
Published online:
2
September
2025
During long-term operation, solar cell cover glasses are exposed to harsh environmental conditions, potentially causing significant surface damage and modification. Against this background, the main objective of the present study is to investigate and characterise the chemical and physical alterations occurring on solar cell cover glass surfaces after prolonged exposure to desert climates. For this purpose, complementary spectroscopic techniques, namely laser-induced breakdown spectroscopy (LIBS) and X-ray photoelectron spectroscopy (XPS), were employed to provide detailed insights into surface modifications and contaminations. Specifically, cover glasses installed for 25 years in the Southern Algerian desert were examined using scanning electron microscopy (SEM), LIBS, and XPS. Apart from mechanical damage such as chipping, adhesion of (hydro) carbonaceous dirt and sand grains, and accumulation of organic herbaceous structures at the outermost surface, significant changes in the chemical composition of the near-surface glass layer were observed. These changes include carbon penetration into the surface and noticeable leaching of key glass constituents such as calcium and magnesium, both effects attributable to prolonged exposure to desert climate. Additionally, notable surface contamination by tin and lead was identified, likely resulting from impurities introduced via the liquid metal bath used during the float glass manufacturing process. It turns out that both influencing factors, manufacturing and exposure, cause an accumulated modification of the investigated glass surfaces, subsequently affecting their optical properties. Such modifications ultimately have implications for the overall efficiency of the embedded actual photovoltaic cell.
© The Author(s) 2025
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
